Wednesday, September 1, 2010

Performance measurement of Banks -NPA analysis & credentials of Parameters

Mockingjay (The Final Book of The Hunger Games)
Licorice Junior's Long Sleeve T-Shirt,Rad Black,X-Large
D-Link DIR-412 Mobile Wireless Router 3G, 11n-based, 150Mbps

Over the last few years Indian Banking, in its attempt to integrate itself with the global banking has been facing lots of hurdles in its way due to its inherent weaknesses, despite its high sounding claims and lofty achievements. In a developing country like ours, banking is seen as an important instrument of development, while with the strenuous NPAs, banks have become helpless burden on the economy. Looking to the changing scenario at the world level, the problem becomes more ironical because Indian banking, cannot afford to remain unresponsive to the global requirements. The banks are, however, aware of the grim situation and are trying their level best to reduce the NPAs ever since the regulatory authorities i.e., Reserve Bank of India and the Government of India are seriously chasing up the issue. Banks are exposed to credit risk, liquidity risk, interest risk, market risk, operational risk and management/ownership risk. It is the credit risk which stands out as the most dreaded one. Though often associated with lending, credit risk arises whenever a party enters into an obligation to make payment or deliver value to the bank. The nature and extent of credit risk, therefore, depend on the quality of loan assets and soundness of investments. Based on the income, expenditure, net interest income, NPAs and capital adequacy one can comment on the profitability and the long run sustenance of the bank. Further, a comparative study on the performance of various banks can be done using a ratio analysis of these parameters. There are a number of ratios that can be used to comment on the different aspects :
 The essential ratios that can be used for assessing the banks' profitability and sustenance are
Profitability
Intermediation Costs/Total Assets
Assets
Net Interest Income/Total Assets
Other Income/Total Assets
Asset Quality
NPAs/Total Assets
NPAs/Advances
Staff Productivity
Net Profit/ Total Number of Employee
Sustenance
Capital/RWAs
 For commenting on the Bank's performance, a comparison to the total assets of the bank will give a true picture.
    Controlled Expenses
The intermediation costs of a bank refer to the operating cost of the bank and include all the administration and operational costs incurred while offering its services. The ratio of the intermediation costs of the bank to the total assets should be kept low to ensure greater profitability. As mentioned earlier, a technology savvy bank will always be in a better position to reduce its operating costs. Consider the operating expenses of the various banking sectors and the industry average for the year 1999-2000. The costs for the entire SCBs rose by 9.1 percent. The maximum rise of 25.1 percent has been witnessed in the new private sector banks while the foreign banks experienced a decline in the operating costs by 3.3 percent. The ratio of the intermediation costs to the total assets indicates a decline. The maximum decline was in the case of new private sector banks and the foreign banks.
    Margins - Lowered by Subdued Interest Rates
The ratio of the net interest income (Spread) to the total assets gives the net interest margin of the bank. This ratio is the actual measure of the bank's performance as an intermediary, as it examines the bank's ability in mobilizing lower cost funds and investing them at a reasonably higher interest. By borrowing short and lending long, banks can earn higher spreads nevertheless by doing so they will be exposed to greater risks. Hence banks need to be cautious and should not accept risks beyond their ability to control/manage them. Product innovation using the right technology is one approach, which can be followed by the banks to mobilize cheaper funds.
  Asset Quality - NPA burden lowering
The asset quality of the banks can be examined by considering the NPAs. These NPAs should be considered against not just total assets but also against the advances, cause the NPAs primarily arise. When NPAs arise, banks have to make provision for the same as per the regulatory prescriptions. When the provisions are adjusted against the Gross NPAs it gives rise to the net NPAs. Provisions reduce the risk exposure arising due to the NPAs to a reasonable extent as they ensure that the banks sustain the possible loss arising from these assets.
   Capital Adequacy Ratio-Strengthening Further
The one important parameter that essentially relates to the bank's ability to sustain the losses due to risk exposures is the bank's capital. The intermediation activity exposes the bank to a variety of risks. Cases of big banks collapsing due to their bank's inability to sustain the risk exposures is readily available. Considering this, it is highly essential to examine the capital vis-à-vis the risk weighted assets. This is the Capital to Risk Weighted Assets Ratio (CRAR) as given by the Basle Committee. The statutory prescription for CRAR is 9 percent, which has been well surpassed by most banks.
http://www.articlesbase.com

How Do I Calculate Finance Charges?

A Little Death In Dixie
The Suburbs
Kindle 3G Wireless Reading Device, Free 3G + Wi-Fi, 6" Display, Graphite, 3G Works Globally - Latest Generation
Dexter: The Fourth Season
The Girl with the Dragon Tattoo

Having some knowledge of how to calculate finance charges is always a good thing. Most lenders, as you know, will do this for you, but it can helpful to be able to check the math yourself. It is important, however, to understand that what is presented here is a basic procedure for calculating finance charges and your lender may be using a more complicated method. There may also be other issues attached with your loan which may affect the charges.

The first thing to understand is that there are two basic parts to a loan. The first issue is called the principal. This is the amount of money that is borrowed. The lender wants to make a profit for his services (lending you the money) and this is called interest. There are many types of interest from simple to variable. This article will examine simple interest calculations.

In simple interest deals, the amount of the interest (expressed as a percentage) does not change over the life of the loan. This is often called flat rate or fixed interest.

The simple interest formula is as follows:

Interest = Principal × Rate × Time

Interest is the total amount of interest paid.

Principal is the amount lent or borrowed.

Rate is the percentage of the principal charged as interest each year.

To do your math, the rate must be expressed as a decimal, so percentages must be divided by 100. For example, if the rate is 18%, then use 18/100 or 0.18 in the formula.

Time is the time in years of the loan.

The simple interest formula is often abbreviated:

I = P R T

Simple interest math problems can be used for borrowing or for lending. The same formulas are used in both cases.

When money is borrowed, the total amount to be paid back equals the principal borrowed plus the interest charge:

Total repayments = principal + interest

Usually the money is paid back in regular installments, either monthly or weekly. To calculate the regular payment amount, you divide the total amount to be repaid by the number of months (or weeks) of the loan.

To convert the loan period, 'T', from years to months, you multiply it by 12. To convert 'T' to weeks, you multiply by 52, since there are 52 weeks in a year.

Here is an example problem to illustrate how this works.

Example:

A single mother purchases a used car by obtaining a simple interest loan. The car costs $1500, and the interest rate that she is being charged on the loan is 12%. The car loan is to be paid back in weekly installments over a period of 2 years. Here is how you answer these questions:

1. What is the amount of interest paid over the 2 years?

2. What is the total amount to be paid back?

3. What is the weekly payment amount?

You were given: principal: 'P' = $1500, interest rate: 'R' = 12% = 0.12, repayment time: 'T' = 2 years.

Step 1: Find the amount of interest paid.

Interest: 'I' = PRT

= 1500 × 0.12 × 2

= $360

Step 2: Find the total amount to be paid back.

Total repayments = principal + interest

= $1500 + $360

= $1860

Step 3: Calculate the weekly payment amount.

Weekly payment amount = total repayments divided by loan period, T, in weeks. In this case, $1860 divided by 104 weeks equals $17.88 per week.
http://www.articlesbase.com